Nissan Ariya Forum banner

Let's talk dash cams...

45K views 159 replies 38 participants last post by  prushnix  
There is a 10-pin connector that goes into the front camera unit on the drivers side. On that connector, Pin 1 is GND and Pin 6 is +12V IGNITION ON. If you follow those wires there are a few points where you can tap into them underneath the plastic connector that houses the Passenger Airbag Light.

View attachment 2314

Be aware that my camera runs off +5V DC so I have a +12V to 5V DC-DC converter inline with the power cable to the camera.

Disclaimer: I am not responsible if you break something, proceed at your own risk/peril. ;)
Do you think the 10pin connector will fit this 10pin adapter from Dongar.
As my first post, the forum doesn't let me post a link.
But Dongar has a 10pin adapter.

I figured, if it does, it will be even a clean install without having to mess with individual wires.
This is for a Platinum Ariya.